LAMINATION ADHESIVES

  • Home
  • LAMINATION ADHESIVES

HILAM WB-300

Description :
HILAM WB adhesive is formaldehyde free acrylic or water based acrylic adhesive designed for dry bond laminating adhesive. Dry bond lamination is the process of coating an adhesive (typically by a gravure application cylinder ) to a substrate, drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate via a heat compression nip. Specially designed for manufacture of flexible laminates used for dry food and beverage packaging, It’s also recommended for non food packaging that similar film and performance requirements apply.
HILAM WB 300 is single component that has good adhesion and flexible film .It has low viscosity that is very suitable for high speed machine.

PHYSICAL PROPERTIES HILAM WB
Ph 6.5 – 7.5
Viscosity, cps, Brookfield Max 50
Solid content,%by wt 44 +/- 1
Specific gravity,gr/ml 1.045 -1.065
Storage stability 72°F(22 °c) 6 Months
Toxicity Non Toxic
APPLICATION AREAS
  • PET / VMCPP
  • PET /Art paper
  • OPP /VMCPP
  • OPP / ART PAPER

FEATURES AND BENEFITS
  • Formaldehyde Free.
  • FDA 175.105 compliance.
  • Good adhesion to metalized film.
  • High bonding strength.
  • Adhesion to wide variety of films.
  • Excellent film clarity.
  • Low odour.
  • Exhibit very low foaming.
  • Compatible with PVDC coated films.
  • Fast in line speed.
  • Dry laminating adhesive.
  • Can be run in general at lower coat weight compared with solvent –based adhesive.
  1. Use Recommendation :
    Hilam WB recommended dry coating weight of 2.5–3.0gr/m2 for laminations, higher coating weight will be necessary for various demanding applications . Temperature is necessary to remove water and exiting web temperature of 70- 1000C is recommended.
  2. Storage /Caution &Safety :
    The adhesive and hardener must not be stored in direct sunlight or near flame or spark source and stored in cool, dry and well ventilated and keep stored in the original unopened and undamaged container. Opened containers of the material have to be closed immediately and the material should be consumed within a short period. Avoid contact with skin & eyes.
  3. Standard Packing :
    HILAM WB is available in 200 Kgs/Barrel or 50 Kgs/Barrel.

HILAM WB-200

Description :
HILAM WB 200 adhesive is formaldehyde free acrylic or water based acrylic adhesive designed for dry bond laminating adhesive. Dry bond lamination is the process of coating an adhesive (typically by a gravure application cylinder ) to a substrate, drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate via a heat compression nip. Specially designed for manufacture of flexible laminates used for dry food and beverage packaging, It’s also recommended for non food packaging that similar film and performance requirements apply.
HILAM WB 200 is single component that has good adhesion and flexible film .It has low viscosity that is very suitable for high speed machine.

PHYSICAL PROPERTIES HILAM WB
Ph 6.5 – 7.5
Viscosity, cps, Brookfield Max 50
Solid content,%by wt 43 +/- 1
Specific gravity,gr/ml 1.045 -1.065
Storage stability 72°F(22 °c) 6 Months
Toxicity Non Toxic
APPLICATION AREAS
  • PET / VMCPP
  • OPP /VMCPP

FEATURES AND BENEFITS
  • Formaldehyde Free.
  • FDA 175.105 compliance.
  • Good adhesion to metalized film.
  • High bonding strength.
  • Adhesion to wide variety of films.
  • Excellent film clarity.
  • Low odour.
  • Exhibit very low foaming.
  • Compatible with PVDC coated films.
  • Fast in line speed.
  • Dry laminating adhesive.
  • Can be run in general at lower coat weight compared with solvent –based adhesive.

  1. Use Recommendation :
    Hilam WB-200 recommended dry coating weight of 2.5 – 3.0gr/m 2 for laminations, higher coating weight will be necessary for various demanding applications .
    Safety regulations with regard to handling of materials as well as material safety data sheets have to be followed.
    Temperature is necessary to remove water and exiting web temperature of 70-100°C is recommended.
  2. Storage /Caution &Safety :
    The adhesive and hardener must not be stored in direct sunlight or near flame or spark source and stored in cool, dry and well ventilated and keep stored in the original unopened and undamaged container. Opened containers of the material have to be closed immediately and the material should be consumed within a short period. Avoid contact with skin & eyes.
  3. Standard Packing :
    HILAM WB 200 is available in 200 Kgs/Barrel or 50Kgs/Barrel.